| Part No. | Name | Qty | Page |
|---|---|---|---|
| 7C-2377 |
SHAFT AS-ARM
|
1 | 166 |
| 154-1584 |
PIN-SPRING
弹簧销 |
1 | 166 |
| 121-2024 |
BASE AS
底座组件 |
1 | 166 |
| 8N-4387 |
DOWEL-HOLLOW
|
2 | 166 |
| 0S-1590 |
BOLT (3/8-16X2-IN)
螺栓 |
4 | 166 |
| 5M-2894 |
WASHER-HARD (10.2X18.5X2.5-MM THK)
硬垫圈 |
4 | 166 |
| 3J-9196 |
NUT-JAM (1/2-20-THD)
防松螺母 |
3 | 166 |
| 4W-6682 |
PUSHROD-VALVE
|
3 | 166 |
| 7E-3772 |
GASKET
密封垫 |
1 | 166 |
| 7N-4782 |
SPRING-LIFTER GUIDE
|
3 | 166 |
| 129-4181 |
BRIDGE AS
|
2 | 166 |
| 2N-5842 |
SCREW (3/8-24X1-IN)
螺钉 |
2 | 166 |
| 9L-7712 |
NUT (3/8-24-THD)
螺母 |
2 | 166 |
| 8T-7581 |
BOLT-12 POINT HEAD (1/2-13X6-IN)
尖端头螺栓 |
2 | 166 |
| 2J-0157 |
SEAL-O-RING
O 形密封圈 |
2 | 166 |
| 1B-2714 |
BOLT (1/4-20X2.5-IN)
螺栓 |
1 | 166 |
| 5P-0537 |
WASHER-HARD (7.2X14.5X2-MM THK)
硬垫圈 |
3 | 166 |
| 8M-2771 |
CLIP
卡箍 |
1 | 166 |
| 121-9840 |
SPACER (2-IN THK)
隔套 |
1 | 166 |
| 0S-1615 |
BOLT (1/4-20X0.75-IN)
螺栓 |
1 | 166 |
| 9X-0352 |
RECEPTACLE AS
|
1 | 166 |
| 6J-2245 |
SEAL-O-RING
O 形密封圈 |
1 | 166 |
| 132-6469 |
HARNESS AS-WIRING (VALVE MECHANISM)
线束组件 |
1 | 166 |
| 9F-7707 |
RING-RETAINING
挡圈 |
3 | 166 |
| 8F-8858 |
VALVE (BUTTON)
阀 |
3 | 166 |
| 4P-2478 |
PLATE
凸轮斜盘 |
1 | 166 |
| 2A-0762 |
BOLT (1/4-20X0.625-IN)
螺栓 |
1 | 166 |
| 7E-6508 |
CAP AS
油加注口盖组件 |
1 | 166 |
