| Part No. | Name | Qty | Page |
|---|---|---|---|
| 7E-3897 |
GEAR-CAMSHAFT DRIVE (88 TEETH)
|
2 | 112 |
| 112-1554 |
GEAR AS-IDLER (88-TEETH)
惰轮组件 |
2 | 112 |
| 125-9751 |
BEARING-SLEEVE
轴承套 |
1 | 112 |
| 0S-1595 |
BOLT (1/2-13X1.25-IN)
螺栓 |
4 | 112 |
| 4P-5437 |
SHAFT-GEAR (CLUSTER)
|
1 | 112 |
| 4W-4586 |
PLATE
凸轮斜盘 |
1 | 112 |
| 5P-8248 |
WASHER-HARD (20X36.5X3.5-MM THK)
硬垫圈 |
2 | 112 |
| 9X-8887 |
BOLT (3/4-10X3-IN)
螺栓 |
2 | 112 |
| 1B-4367 |
BOLT (5/8-11X3-IN)
螺栓 |
4 | 112 |
| 3S-1307 |
BOLT-12 POINT HEAD (3/8-16X2-IN)
尖端头螺栓 |
12 | 112 |
| 2W-2895 |
GEAR-CRANKSHAFT (92-TEETH)
|
1 | 112 |
| 0L-1351 |
BOLT (3/8-16X0.875-IN)
螺栓 |
4 | 112 |
| 7N-5254 |
PLATE-THRUST
止推板 |
1 | 112 |
| 4P-5459 |
GEAR AS-BALANCER (44 & 92 TEETH)
|
1 | 112 |
| 4P-5438 |
BEARING-SLEEVE
轴承套 |
1 | 112 |
| 101-1368 |
WASHER-THRUST (19.5X106X1.9-MM THK)
止推垫圈 |
2 | 112 |
| 7E-5324 |
RING
密封圈 |
1 | 112 |
| 8S-2331 |
BOLT-12 POINT HEAD (5/8-11X2-IN)
尖端头螺栓 |
2 | 112 |
